If your Turbo Levo is 2019 or newer then, yes! You have our full range to choose from, The previous model years used a proprietary shock length and mount so we do not have a fit for model years 2017 and 2018. The newer Turbo Levo uses a 210 x 52.5 shock which is a size that all of our shocks come in. 

If you are interested in our IL series then you will find that we have a specific part number for the Levo. The DBair IL part number is BAD2345 and the DBcoil IL part number is BAD2447K. The cylinder head on our IL series must be "clocked" 45 degrees in order to clear the Levo's frame. Those shocks also include the hardware that you need to mount them.

If our DBcoil CS or DBair CS is what you're after then no special "clocking" is required. For the DBair CS you will need BAD2344--this shock comes with the hardware you need to bolt the shock directly on to your bike. For the DBcoil CS you will need BAD2347. This is a "standard" shock that does not come with hardware. Should you want new hardware you will need the 20 x 6mm (.HWDA) for the "A" side. The "B" side is an Open End Eye and does not require hardware.

Keep in mind that the Specialized Turbo Levo has a relatively Linear leverage ratio, meaning the bike was designed around a progressive shock. If you do decide to use a Coil shock then you will find it best to use our Progressive Valt Spring. You will need the 55mm version. Also, when doing your calculation for spring rate be sure to compensate for the added weight of the bike. If you are in between spring sizes it will be best to size up.