Our eeSilk Stem is highly tunable to your unique riding style and preferences via an external, single bolt elastomer change (there is no need to remove your...

Unlike eeSilk and eeSilk+ Seatposts, the eeSilk Stem elastomers were developed based on rider preference and varying terrain rather than rider weight.  ...

The compliance switch on the eeSilk stem will allow you to go between soft and firm compliance modes, allowing for the rider to utilize a softer elastomer f...

Its easiest to change elastomers with the stem installed on the bicycle. Press down slightly on handlebars to preload elastomer to remove pressure on stem p...

The eeSilk stem was designed as a compliance product aimed at reducing fatigue, increase performance and to absorb small to medium sized bumps only. Use cau...

Subtle differences in performance may be observed across varying ambient temperatures due to the elastomer material. If any change does happen it should be ...

You can put the stem on any bike you choose, however, it is a compliance based product designed to reduce fatigue over long, rough rides. It was not designe...

Elastomer lifespan depends on numerous factors (stem length, elastomer choice, rider weight, riding conditions, etc). A good rule of thumb is that if your s...

Due to the mechanism design, the eeSilk stem is slightly taller than normal "road" stems. The stack height of the stem is 49mm. This means you wil...

The compliance switch is not a complete mechanical "lockout" nor is there a middle setting. The compliance switch will provide "soft" an...